11 Postfix With SMTP-AUTH And TLS
In order to install Postfix with SMTP-AUTH and TLS do the following steps:
apt-get install postfix libsasl2 sasl2-bin libsasl2-modules libdb3-util procmail
You will be asked two questions. Answer as follows:
General type of configuration? <-- Internet Site
Mail name? <-- server1.example.com
Then run
dpkg-reconfigure postfix
Again, you'll be asked some questions:
General type of configuration? <-- Internet Site
Where should mail for root go <-- NONE
Mail name? <-- server1.example.com
Other destinations to accept mail for? (blank for none) <-- server1.example.com, localhost.example.com, localhost
Force synchronous updates on mail queue? <-- No
Local networks? <-- 127.0.0.0/8
Use procmail for local delivery? <-- Yes
Mailbox size limit <-- 0
Local address extension character? <-- +
Internet protocols to use? <-- all
Next, do this:
postconf -e 'smtpd_sasl_local_domain ='
postconf -e 'smtpd_sasl_auth_enable = yes'
postconf -e 'smtpd_sasl_security_options = noanonymous'
postconf -e 'broken_sasl_auth_clients = yes'
postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination'
postconf -e 'inet_interfaces = all'
echo 'pwcheck_method: saslauthd' >> /etc/postfix/sasl/smtpd.conf
echo 'mech_list: plain login' >> /etc/postfix/sasl/smtpd.conf
Afterwards we create the certificates for TLS:
mkdir /etc/postfix/ssl
cd /etc/postfix/ssl/
openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024
chmod 600 smtpd.key
openssl req -new -key smtpd.key -out smtpd.csr
openssl x509 -req -days 3650 -in smtpd.csr -signkey smtpd.key -out smtpd.crt
openssl rsa -in smtpd.key -out smtpd.key.unencrypted
mv -f smtpd.key.unencrypted smtpd.key
openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650
Next we configure Postfix for TLS:
postconf -e 'smtpd_tls_auth_only = no'
postconf -e 'smtp_use_tls = yes'
postconf -e 'smtpd_use_tls = yes'
postconf -e 'smtp_tls_note_starttls_offer = yes'
postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key'
postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt'
postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem'
postconf -e 'smtpd_tls_loglevel = 1'
postconf -e 'smtpd_tls_received_header = yes'
postconf -e 'smtpd_tls_session_cache_timeout = 3600s'
postconf -e 'tls_random_source = dev:/dev/urandom'
postconf -e 'myhostname = server1.example.com'
The file /etc/postfix/main.cf should now look like this:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version |
Restart Postfix:
/etc/init.d/postfix restart
Authentication will be done by saslauthd. We have to change a few things to make it work properly. Because Postfix runs chrooted in /var/spool/postfix we have to do the following:
mkdir -p /var/spool/postfix/var/run/saslauthd
Now we have to edit /etc/default/saslauthd in order to activate saslauthd. Remove # in front of START=yes and add the line PARAMS="-m /var/spool/postfix/var/run/saslauthd -r":
vi /etc/default/saslauthd
# This needs to be uncommented before saslauthd will be run automatically |
We must also edit /etc/init.d/saslauthd and change the location of saslauthd's PID file. Change the value of PIDFILE to /var/spool/postfix/var/run/${NAME}/saslauthd.pid:
vi /etc/init.d/saslauthd
[...] |
Now start saslauthd:
/etc/init.d/saslauthd start
To see if SMTP-AUTH and TLS work properly now run the following command:
telnet localhost 25
After you have established the connection to your Postfix mail server type
ehlo localhost
If you see the lines
250-STARTTLS
and
250-AUTH
everything is fine.
Type
quit
to return to the system's shell.
12 Courier-IMAP/Courier-POP3
Run this to install Courier-IMAP/Courier-IMAP-SSL (for IMAPs on port 993) and Courier-POP3/Courier-POP3-SSL (for POP3s on port 995):
apt-get install courier-authdaemon courier-base courier-imap courier-imap-ssl courier-pop courier-pop-ssl courier-ssl gamin libgamin0 libglib2.0-0
You will be asked two questions:
Create directories for web-based administration ? <-- No
SSL certificate required <-- Ok
If you do not want to use ISPConfig, configure Postfix to deliver emails to a user's Maildir*:
postconf -e 'home_mailbox = Maildir/'
postconf -e 'mailbox_command ='
/etc/init.d/postfix restart
*Please note: You do not have to do this if you intend to use ISPConfig on your system as ISPConfig does the necessary configuration using procmail recipes. But please go sure to enable Maildir under Management -> Server -> Settings -> EMail in the ISPConfig web interface.
Tidak ada komentar:
Posting Komentar