Cara kerja keyboard

Inside the Keyboard

A keyboard is a lot like a miniature computer. It has its own processor and circuitry that carries information to and from that processor. A large part of this circuitry makes up the key matrix.

The microprocessor and controller circuitry of a keyboard

The key matrix is a grid of circuits underneath the keys. In all keyboards (except for capacitive models, which we'll discuss in the next section), each circuit is broken at a point below each key. When you press a key, it presses aswitch, completing the circuit and allowing a tiny amount of current to flow through. The mechanical action of the switch causes some vibration, called bounce, which the processor filters out. If you press and hold a key, the processor recognizes it as the equivalent of pressing a key repeatedly.

When the processor finds a circuit that is closed, it compares the location of that circuit on the key matrix to thecharacter map in its read-only memory (ROM). A character map is basically a comparison chart or lookup table. It tells the processor the position of each key in the matrix and what each keystroke or combination of keystrokes represents. For example, the character map lets the processor know that pressing the a key by itself corresponds to a small letter "a," but the Shift and a keys pressed together correspond to a capital "A."

The key matrix

A computer can also use separate character maps, overriding the one found in the keyboard. This can be useful if a person is typing in a language that uses letters that don't have English equivalents on a keyboard with English letters. People can also set their computers to interpret their keystrokes as though they were typing on a Dvorak keyboard even though their actual keys are arranged in a QWERTY layout. In addition, operating systems and applications have keyboard accessibility settings that let people change their keyboard's behavior to adapt to disabilities.

sumber : computer

Sistem kerjanya:

secara general logicnya

1.komputer mendapat input dari I/O
2. data input di conversi ke format ascii sama converter di keyboard
3. data yang di converter keyboard di conver lagi ke format binary di dalam CPU
4. data yang sudah binary di kirim ke converter device output
5. data di convert device output data dirobah kembali menjadi format ascii setelah dari format ascii di convert lagi jd format teks dsb dan dikirim ke device display


sumber : Kaskus.us